Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Exterior Panels/Trim
Model Year: 2008 Model: Sequoia Doc ID: RM0000018Y0006X
Title: EXTERIOR PANELS / TRIM: ROOF DRIP SIDE FINISH MOULDING: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for the RH side and LH side.
  • The procedure described below is for the LH side.

1. REMOVE ROOF DRIP SIDE FINISH MOULDING

(a) Apply protective tape to the roof panel in the area around the roof drip side finish moulding.

(b) Disengage the 2 clips and remove the roof drip side finish moulding.

NOTICE:

  • Do not remove the clips.
  • Replace the clips with new clips if damaged.